Semua kategori
Kategori terpilih
Trade Assurance
Pusat Pembeli
Pusat Bantuan
Unduh aplikasinya
Jadi supplier

Original Matek Systems GNSS M10Q-5883 U-Blox M10 GPS with Compass QMC5883L Module Digital AirSpeed 4~9V for FPV Racing Drone

Belum ada ulasan
Original Matek Systems GNSS M10Q-5883 U-Blox M10 GPS with Compass QMC5883L Module Digital AirSpeed 4~9V for FPV Racing Drone
Original Matek Systems GNSS M10Q-5883 U-Blox M10 GPS with Compass QMC5883L Module Digital AirSpeed 4~9V for FPV Racing Drone
Original Matek Systems GNSS M10Q-5883 U-Blox M10 GPS with Compass QMC5883L Module Digital AirSpeed 4~9V for FPV Racing Drone
Original Matek Systems GNSS M10Q-5883 U-Blox M10 GPS with Compass QMC5883L Module Digital AirSpeed 4~9V for FPV Racing Drone
Original Matek Systems GNSS M10Q-5883 U-Blox M10 GPS with Compass QMC5883L Module Digital AirSpeed 4~9V for FPV Racing Drone
Original Matek Systems GNSS M10Q-5883 U-Blox M10 GPS with Compass QMC5883L Module Digital AirSpeed 4~9V for FPV Racing Drone

Atribut produk

Atribut lainnya

place of origin
Guangdong, China
brand name
OEM
Product Name
GNSS u-blox SAM-M10Q-00B (GPS, GLONASS, Galileo and BeiDou)
Magnetic Compass
QMC5883L
Patch antenna
15*15*4mm
Input voltage range:
4~9V (5V pad/pin)
Power consumption:
13mA
UART baudrate:
9600 default
Operating Temperatures:
-20~80 °C
size:
20mm*20mm*12.4mm
weight:
8g

Pengemasan dan pengiriman

jual Unit:
item tunggal
ukuran paket tunggal:
50X40X30 cm
tunggal berat kotor:
3.000 kg

Estimasi waktu

Deskripsi produk

Peringatan/penafian
Pengingat kepatuhan untuk produk yang dilarang dan dibatasi
Proposisi California peringatan konsumen 65
Product Description

Matek Systems GNSS M10Q-5883 U-Blox M10 GPS with Compass QMC5883L Module Digital AirSpeed 4~9V For FPV Racing Drone

M10Q-5883 uses multi-constellation GNSS module powered by u-blox SAM-M10Q-00B.
The SAM-M10Q features the u-blox M10 standard precision GNSS platform and provides exceptional sensitivity and acquisition time for all L1 GNSS signals. SAM-M10Q supports concurrent reception of four GNSS (GPS, GLONASS, Galileo, and BeiDou). The high number of visible satellites enables the receiver to select the best signals. This maximizes the position availability, in particular under challenging conditions such as in deep urban canyons. u-blox Super-S (Super-Signal) technology offers great RF sensitivity and can improve the dynamic position accuracy in non-line-of-sight scenarios.
The high-gain 15 x 15 mm2 patch antenna provides the best balance between performance and small size. The omnidirectional antenna radiation pattern increases flexibility for device installation.
More details about the SAM-M10Q, pls check out u-blox SAM-M10Q page

Specifications
GNSS u-blox SAM-M10Q-00B (GPS, GLONASS, Galileo and BeiDou)
Magnetic Compass QMC5883L
Patch antenna 15*15*4mm
Input voltage range: 4~9V (5V pad/pin)
Power consumption: 13mA
UART baudrate: 9600 default
Operating Temperatures: -20~80 C
UART(TX, RX) interface for GNSS SAM-M10Q-00B
I2C(DA, CL) interface for Compass QMC5883L
JST-GH-6P connector (SM06B-GHS-TB). 1.27mm pitch
GNSS PPS LED, Green. (Solid ON after powering on, blinking(1Hz) when GNSS get 3D fix)
Protocol: UBX(u-blox) 5Hz@GPS+GAL+BDS B1C+GLO or NMEA 1Hz
20mm*20mm*12.4mm
8g
M10Q-5883_step.zip

Includes
1x M10Q-5883
1x JST-GH-6P to JST-GH-6P 20cm silicon wire

Wiring and settings
M10Q-5883 5V to Flight controller 4~9V
M10Q-5883 RX to Flight controller UART_TX
M10Q-5883 TX to Flight controller UART_RX
M10Q-5883 CL to Flight controller I2C_SCL
M10Q-5883 DA to Flight controller I2C_SDA
M10Q-5883 G to Flight controller GND

Tips and Notes
Compass Alignment(flat mounting): Tilting the magnetometer is strongly discouraged !
INAV/BetaFLight: compass Arrow forward, set CW 270 Flip when flight controller arrow is facing forward.
INAV/BetaFLight: compass Arrow backward, set CW 90 Flip when flight controller arrow is facing forward.
Ardupilot/Mission Planner: Rotation None.
Make sure to have compass/magnetometer 10cm away from power lines/ESC/motors/iron based material
------

INAV 5.0.0, Betaflight 4.3.0, ArduPilot 4.3 or newer is required.
UBlox NEO-M9N, MAX-M10S, SAM-M10Q series all don't have dataflash built in. once GNSS is powered off and the supercapacitor run
out. the settings will back to default.
UBX protocol is bidirectional. Flight controller firmware can change settings on GPS via UBX protocol. You don't need to set GNSS
module parameters in u-center.
The default configuration on SAM-M10Q with ublox FW 5.1 is concurrent reception of GPS, Galileo, GLONASS, and BeiDou B1C with QZSS
and SBAS enabled.
Start with u-blox GNSS FW3.01, timepulse is aligned with UTC time and that time is set valid only after leap second is downloaded.
That could take up to 12.5 min. Probably PPS LED will not blink immediately after GPS has 3D fixed.
The M10Q-5883 provides the ability to reset the receiver. Bridging "RST" pad to Ground for at least 100 ms will trigger a cold
start. RESET will delete all information and trigger a cold start. It should only be used as a recovery option. If you are sure
wiring and setup are all right. but flight controller can't detect the GNSS module(grey GPS icon), try doing reset.
The scratches on ceramic antenna are the result of tuning the antenna.
Troubleshoot GPS related issues: http://www.mateksys.com/?p=5712#tab-id-6
u-center Windows
*** The SKU silk print on the first batch of M10Q-5883 PCB is "M10-5883".
Specification
item
value
Place of Origin
China
 
Zhejiang
Brand Name
Matek System
Model Number
M10Q-5883
Product Name
GNSS u-blox SAM-M10Q-00B (GPS, GLONASS, Galileo and BeiDou)
Magnetic Compass
QMC5883L
Patch antenna
15*15*4mm
Input voltage range:
4~9V (5V pad/pin)
Power consumption:
13mA
UART baudrate:
9600 default
Operating Temperatures:
-20~80 C
size:
20mm*20mm*12.4mm
weight:
8g
 This product is restricted to sensitive regions, especially Ukraine, Russia, and the Middle East
5 - 9 Buah
Rp 907.499
10 - 99 Buah
Rp 611.173
>= 100 Buah
Rp 493.316

Variasi

Pilihan:1 compatible model.
Pilih sekarang

compatible model(1)

For FPV

Jasa pengiriman

Biaya ongkir dan jadwal pengiriman bisa dinegoisasikan. Hubungi supplier untuk lebih lanjut

Perlindungan produk

Pembayaran aman

Transaksi Anda di Cooig.com dilindungi dengan enkripsi SSL yang ketat dan protokol keamanan data PCI DSS.

Kebijakan pengembalian dana

Dapatkan pengembalian dana jika pesanan Anda tidak terkirim, hilang atau bermasalah.

Hubungi Supplier
Chat Sekarang
survei